Know Your AEGIS Boost From The Start

When it was released in May of 2021, the Aegis Boost quickly became a favorite among vapers. The Aegis Boost does not take a long time to heat up and makes for a great all day vaper. In this review I am going to take a look at the geekvape aegis boost and see if it lives up to the hype. I will also explain how you can get your hands on one for free.

geekvape aegis boost

The GeekVape AEGIS Boost comes with two tanks, which include the Tank/ Blocks, Charging Blocks, and a USB C Port. The Block provides the physical resistance against electrical charges while the charging blocks provide an insulating layer between the electrical charges and the tank for a safer environment. The C port allows you to plug in your laptop or other devices for charging. There is a charging LED located above the USB C Port, which turns off automatically when your batteries are low. I really like this system because there is no need to constantly replace the battery especially if you use the laptop.

The vandy vaporizer jackaroo is a unique device compared to most vaporizers on the market. Most vaporizers rely on a center heating element to get the vaporizer hot, but the vandy uses a micro overheating element on the bottom plate. The vandy has a unique heating mechanism which provides a very smooth and warm experience. The vaporizers aegis boost pro and aegis boost models do not use the bottom plate to get hot, but they both use the same unique heating mechanism.

The heart of this vaporizer is the dual interchangeable coils that lie on either side of the USB C port. The dual coils allow for a larger vapor volume and a smoother experience. You can even turn down the airflow control to reduce the amount of clouds. The GeekVape AEGIS Boost has two interchangeable coils that are covered by a stainless steel ring, making the coils much easier to clean than other devices.

The biggest unique feature of the AEGIS Boost is the turbo button. When the turbo button is pressed, it instantly kicks the unit into full speed mode. The AEGIS Boost provides incredible atomization and incredible power from the base station. This unique feature is provided by the unique airflow patterns and heat mixing capabilities of the AEGIS Boost.

One of the best features of the AEGIS Boost is that it comes with a vaporizer that matches the size of the unit. It has the ability to fit into the back pocket of any vaper, but most vapers prefer the standard sizes that the vaporizer comes with. The vaporizer also has a built in light that makes it easy to see when the AEGIS Boost is on. This is a great feature for any smart vaper. Many of the other vaporizers will only come with batteries.

There are a few things you need to know about the AEGIS Boost before purchasing it. The most important thing to know is that this vaporizer requires two batteries to be powered on. Other than the two batteries the unit should always be on so that you can control the speed and heat without having to constantly re ignition the coils. The unique airflow patterns of the AEGIS Boost allow for the coils to change speed, which also means they need to be replaced approximately every three months.

If you have never used a vaporizer before it may take you a little time to get used to them. After your first time using the AEGIS Boost you may find that you do not want to go back to your old unit. The unique airflow control ring allows you to change the speed at which the coils blow and helps the coils last longer. With the many different features of the GeekVape AEGIS Boost, you should have no problem finding one to fit your needs. You can use the vaporizer in the same places that you would use a standard Vaping Pod.


邮箱地址不会被公开。 必填项已用*标注